Ultra thin high-speed rotating Hydraulic Cylinder is a Hydraulic Actuator designed specifically for applications where space is limited and high-speed rotation is required. The following is a detailed product introduction:
**1. Product Features**
-Ultra thin design: With a compact structure and significantly lower thickness than traditional Hydraulic Cylinders, it is suitable for equipment with limited installation space.
-* * High speed rotation * *: Supports high speeds (specific values depend on the model, usually up to hundreds to thousands of RPM), and responds quickly.
-* * High torque output * *: Optimize internal sealing and bearing structure to maintain high torque performance while thinning.
-Low friction seal: Using special materials such as PTFE or composite sealing rings to reduce friction loss and extend service life.
-High pressure resistance: With a wide range of working pressures (such as 10-35MPa), it is suitable for high-pressure hydraulic systems.
**2. Typical application scenarios**
-Industrial Automation: Mechanical arm joints, rotating fixtures, and indexing disc drives.
-Machine tool equipment: tool rotation or workpiece clamping of precision machining centers.
-* * Aerospace * *: Aircraft control surfaces, ground support equipment.
-New energy equipment: wind power variable pitch system, solar tracking device.
-* * Medical Machinery * *: Operating table rotation mechanism, imaging equipment positioning.
**3. Example of Technical Parameters * * (Please refer to the model for details)
|* * Project * * | * * Parameter Range * *|
|------------------|----------------------------|
|Outer diameter/thickness | Φ 50-200mm/15-50mm|
|Speed | 300-1500 RPM|
|Work pressure | 10-35 MPa|
|Torque output | 50-2000 N · m|
|Medium temperature | -20 ℃ to+80 ℃|
|Sealing material | Fluororubber, polyurethane or customized material|
|Connection method | Flanged, threaded or customized interface|
**4. Structural advantages**
-Integrated design: Built in rotary joint to avoid external pipeline entanglement.
-Wear resistant bearings: using angular contact ball bearings or cross roller bearings to withstand radial/axial loads.
-Anti leakage: Multi channel redundant sealing design ensures long-term use without leakage.
**5. Selection precautions**
-* * Load requirement * *: According to the torque and speed matching model, a 20% safety margin needs to be reserved.
-Installation space: Confirm the outer diameter, thickness, and interface dimensions of the oil cylinder.
-* * Medium compatibility * *: Check the compatibility between the hydraulic oil type (mineral oil, synthetic ester, etc.) and the sealing material.
-Environmental conditions: Special coatings or materials are required for high temperature and corrosive environments.
Contact Now